Place of Origin : Changsha,China
FULLY AUTOMATIC OPTIFLASH PMCC flash point tester is conformed to GB/T261, ASTM D93 and the latest ISO 2719:Determination of flash point -- pensky-martens closed cup method
FDT-0292 FULLY AUTOMATIC OPTIFLASH PMCC Flash Point Tester
Scope
FULLY AUTOMATIC OPTIFLASH PMCC Flash Point Tester Is Conformed To GB/T261, ASTM D93 And The Latest ISO 2719:Determination Of Flash Point -- Pensky-martens Closed Cup Method
Technical Parameters
1. Working Power: AC 220V ± 10%, 50Hz
2.Range: Room Temperature ~ 300 ?;Resolution: 0.1?
3.Heating Speed:
5(? / Min ) ~6(? / Min ) ( ASTM D93 Procedure A)
1(? / Min )~1.5(? / Min)( ASTM D93 Procedure B )
4.Agitation Speed:
90( R./min)~120(r./min). (ASTM D93 Procedure A)
250(r/min)±10(r/min). (ASTM D93 Procedure B)
5. Ignition: Electronic Ignition And The Gas Flame
6.Adapt To The Environment Temperature: 10-40 ?
7.Adapt To The Environment Humidity: <85%
8.Total Power Consumption: 500W
Features:
1. Adopt FRIEND's Special Automatic Ignition Sensing System To Automatically Extinguish The Fire When The Fire Occurs, To Ensure The Safety Of The Laboratory.
2, Using A Circular Overall Heating Structure, Heating More Uniform, Heating Rate Is More Accurate
3, Using Air-cooled Temperature Control System To Ensure That The Furnace Temperature Is Consistent
4, Using Automatic Ignition, Automatic Opening, Automatic Detection, Self-diagnosis Function, One-button Operation
5, With Self-over Temperature Protection, Over Temperature Range Can Be Set Freely
6, Using Touch Screen Display, Real-time Simulation Tracking Shows The Function Curve Of Heating And Test Time, Real-time Prompt Function Of Operation Interface
