Anti Foam Agents White emulsion Viscosity 1500 Silicone Defoamer For Waste Water Treatment - Product

Other Specification : Anti Foam Agents White Emulsion Viscosity 1500 Silicone Defoamer For Waste Water Treatment 1 Properties And Characteristics Of Products: KY-2130 Is A New Type Silicone Antifoamer Specially For Water System. Which Has Excellent Acid And Alkali Resistance, Can Be Used In Wide Range Of PH, Has The Faster Defoaming Speed And Longer Bubble Control Effection Than The Average Ones. Low Viscosity And Easily Dispersing In Water, Especially Suitable To The Bubble Defoaming Requirements In Non-ionic And Anionic Water Based Surfactant . 2Maintechnicalindex: - - - - ItemNo Index | KY-2130A | KY-2130B | KY-2130C | Appearance | Whiteemulsion | Whiteemulsion | Whiteemulsion | Solidcontent(%) | 302 | 201 | 101 | Viscosity(25,mpa.s) | 500-1500 | 500-1500 | 500-1500 | PH | 6-7 | 6-7 | 6-7 | Iontype | Non-ionic | Non-ionic | Non-ionic | - - - - 3 Usage Way And Dosage: 1 Stirring Uniformity Before Using. In Order To Achieve The Best Effection, Must Scatter Defoaming Agent Completely In Foam Medium. Thus You Can Also Dilute Antifoam With 1 ~ 5 Times Amount Of Cold Water In Advance, When Diluting The Antifoam, Should Adding Defoaming Agent Into Water With Stirring Water Slowly And And Mixing Them Blending. Diluted Defoaming Agent Shall Be Immediately Used. 2 If The Defoaming Agent-using System Has Fully Mixing Or Turned Equipments( Can Make The Defoaming Agent Spread Uniformity In Sparkling Medium), The Defoaming Agent Can Be Directly Joined Into Sparkling Medium, There Is No Need For Diluting. 3 Subject To The Influence Of The Factors Of Foaming Medium, Foaming Temperature, Chemical Charateristics, Foaming Content, Difference In Stiring Etc, The Exact Appropriate Concentration Must Be Estimated By Clients Via Testing. 4 Applications: 1, Specially For Industrial Sewage And Water Quality Stabilizer, 2, Chemical Detergent, Metal Cutting Fluid, Metal Grindin

View Profile