Low temperature Silicone Defoamer, high efficient modified silicone antifoam emulsion - Product

Other Specification : Low Temperature Silicone Defoamer, High Efficient Modified Silicone Antifoam Emulsion For Water Treatment KY-2110 Popular Silicone Antifoamer 1 Properties And Characteristics Of Products: KY-2110 Is A New Type And High Efficient Modified Silicone Antifoam Emulsion. KY-2110 Is Easily Scattered In Water System, Can Deform The Bubble Quickly, Good Durability In Deforming, Which Can Be Applied In Strong Acid And Alkaline, Good Stability, Especially Suitable To The Water System With High Demand Bubble Defoaming Requirements. 2Maintechnicalindex: - - - - ItemNoIndex | KY-2110A | KY-2110B | KY-2110C | Appearance | Whiteemulsion | Whiteemulsion | Whiteemulsion | Solidcontent(%) | 342 | 201 | 101 | Viscosity(25,mpa.s) | 500-1500 | 500-1500 | 500-1500 | PH | 7-8 | 7-8 | 7-8 | Iontype | Non-ionic | Non-ionic | Non-ionic | - - - - 3 Usage Way And Dosage: 1) Stirring Uniformity Before Using. In Order To Achieve The Best Effection, Must Scatter Defoaming Agent Completely In Foam Medium. Thus You Can Also Dilute Antifoam With 1 ~ 5 Times Amount Of Cold Water In Advance, When Diluting The Antifoam, Should Adding Defoaming Agent Into Water With Stirring Water Slowly And And Mixing Them Blending. Diluted Defoaming Agent Shall Be Immediately Used. 2) If The Defoaming Agent-using System Has Fully Mixing Or Turned Equipments( Can Make The Defoaming Agent Spread Uniformity In Sparkling Medium), The Defoaming Agent Can Be Directly Joined Into Sparkling Medium, There Is No Need For Diluting. 3) Subject To The Influence Of The Factors Of Foaming Medium, Foaming Temperature, Chemical Charateristics, Foaming Content, Difference In Stiring Etc, The Exact Appropriate Concentration Must Be Estimated By Clients Via Testing. 4 Applications: 1). For Sizing Agent Under High Speed Hydraulic Looms, Spray Adhesive Cotton Pulp, Latex And Medium Temperature Dye

View Profile