Shoe Mold Making Silicone Rubber - Product
Place of Origin : Shenzhen,China
Delivery Terms : By Air Or By Sea
Delivery Time : Within 3 Days Upon Bank Receipt
Product Capacity : 8 Ton Per Day
Payment Terms : T/T,L/C, West Union, Paypal
Product Description
1. Usages for Shoe Mold Making Silicone Rubber
Shoe Mold Making Silicone Rubber is primarily intended for epoxy shoe sole reproduction and shoe mold making,shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
Basic Information
Brand : Hong Ye Silicone
Model : HY-620
Material : Liquid Silicone Rubber
Color : White, Any Color
Expiry/Validation Period : 12 Months
Physical Specification
Size or Volume : 25kg/drum, 200kg/drum
Weight : 25kg/drum, 200kg/drum
Other Specification : 1.Features For Shoe Mold Making Silicone Rubber
Shoe Mold Making Silicone Rubber Is Features As:
1). Goodcharacteristics Of Easy-operation
2). Light Viscosityand Good Fluidity
3). Low Shrinkage
4). Favorable Tension
5). No Deformatio
6). Favorable Hardness
7). High Temperatureresistance, Acid And Alkali-resistance And Ageing Resistance
2. Operations For Shoe Mold Making Silicone Rubber
The Proportions And Reactions Of The Curing Agent And The Silicon Are Listed As Follows:
1). Adding Curing Agent 1%, The Silicone Can Still Be Operated Within 2.5 Hours And Can Be Demoulded After 6-8 Hours.
2). Adding Curing Agent 2%, The Silicone Can Still Be Operated Within 50 Minutes To 1 Hour And Can Be Demoulded After 2-3 Hours.
3). Adding Curing Agent 3%, The Silicone Can Still Be Operated Within 28 - 30 Minutes And Can Be Demoulded After 1.5-2 Hours.
4). Adding Curing Agent 4%, The Silicone Can Still Be Operated Within 10 - 15 Minutes And Can Be Demoulded After 1 -1.5 Hours.
3. FAQ For Shoe Mold Making Silicone Rubber
Why Could The Silicone Mold Be Reused Only For A Few Times?
It Can Be Due To The Following Reasons:
A. Adding Too Much Silicone Oil Into Silicon Rubber. Silicon Oil Is An Additive Which Destroies The Molecular Chain Of Silicone Rubber And Reduce The Tension And Tear Strength.
B. Using The Silicon Rubber With A High Hardness To Make Molds For Small Sized Products With Delicate And Intricate Designs And The Silicon Rubber With A Low Hardness To Makes Molds For Large Sized Products With Simple Designs.
(Notes: We Should Choose The Silicon Rubber Specifically According To The Requirements Of Our Products To Avoid This Problem.
4. Package For Shoe Mold Making Silicone Rubber
Packed In Clean 25kg/pail, 200kg/pail.
If You Have Any Questions For Shoe Mold Making Silicone Rubber, Just Feel Free To Contact Ms Kaka
Email: Hysa(at)szrl.net