motorcycle tires vulcanizing machine - Product

Other Specification : Product Profile: This Press Can Realize Tire Loading, Shaping, Vulcanizing And Unloading Automatically. Tire Can Be Cooled Automatically With Post Cure Inflator. It Can Adopt Two-half Mould And Segmented Mould. Our Machine Advantage: 1.Hydraulic Pressure Drives The Mould Opening/closing And Center Mechanism. Multi-cylinder Provide Pressure To Make Even Force And Small Deformation On Platens 2.The Safety Lock Can Make Sure The Safety For Maintenance 3.The Mould Height Can Be Adjusted Automatically 4.The Hydraulic System Adopts Yuken, Rexroth, Parke World Famous Brand Which Can Work Safely, Reliably And Without Any Leakage 5.Low Energy Consumption 6.Advanced Control System Can Finish The Setting Of Vulcanizing And Parameter Changing Rapidly. Technical Parameter Of Motorcycle Tire Vulcanizing Curing Press Machine: - - - - Tire Type | Motorcycle Tire | Motorcycle Tire | Specification | 8"- 21" | 4"- 12" | Mould Quantity | 2-4 | 2-4 | Total Pressure(each Mould)(Mpa) | 100 | 60 | Hydraulic System Pressure Setting Value (Mpa) | <=21 | <=21 | Hydraulic Working Pressure Setting Value(Mpa) | <=19.5 | <=19.5 | Hot Plate Diameter(mm) | 950 | 650 | Insulation Cover Inner Diameter(mm) | 975 | 700 | Max Distance Between Hot Plates(mm) | 1000 | 1000 | Applicable Mould Height(mm) | 120-300 | 120-300 | Green Tire Thickness(mm) | 450 | 450 | Demoulding Force,(KN) | 750 | 750 | Max Jacking Tire Height(mm) | 200 | 200 | Open(close) Mould Speed(mm/s) | 60 | 60 | Heating Steam Pressure Of Hot Plate(Mpa) | Max 1.0 | Max 1.0 | Pressure Of Inner Pressure Or Compressed Air(Mpa) | 1.5-2.3 | 1.5-2.3 | Pressure Of Shaping Pressure Or Compressed Air(Mpa) | 0.1-0.2 | 0.1-0.2 | Pressure For Water(gas) Cylinder (Mpa) | 1.5-2.0 | 1.5-2.0 | Compressed Air Pressure Fo

View Profile