Place of Origin : Anping,China
Diamond Mesh Lath is a kind of Expanded Metal Lathe, manufactured from steel sheets, slit and expanded to small diamond openings. Mostly supplied in flat rectangular sheets of 0.6m x 2.5m. Galvanized Lath of Diamond Mesh Sheet is used in structure reinforcement to hold plaster on roof, wall and ceilings, suitable for masonry surface stucco and plastering uses.
Sheet Size: 27" X 96"
Specification:
3.50 Pounds/Square Yard
Materials: Hot Dipped Galvanized Steel Sheets.
Diamond Mesh Lathe Wire
Material: Zinc Coated Carbon Steel
Weight: 1.75lbs, 2.51lbs, 3.4lbs, 3.5lbs
Self Furred Diamond Mesh Lath Is Made To Be Used Over Solid Surfaces To Be Furred Approximately ¼ Inch Away From The Wall To Allow For The Proper Behind The Lath. Designed With A Surface Studded In Dimples Or Embossed “V” Groove That Provide The Required ¼ Inch Of Furring.
Galvanised Expanded Coil Mesh, In 100mm X 15m Length, 150mm Coil Wdith X 30m Length.
Opening: Diamond
For Plastering Back Lathing
Expanded Metal Lath Sheet
Self Furring Design
Specification: 0.5 Mm. Thickness
Mesh Size 5.7 X 11.2 Mm.
Supplied In 1x10 M / Roll
Finished Sheet In 700x2500mm
For Thailand Market
Expanded Metal Lath
Mesh Pattern: Diamond hole
Opening : 25 X 25 MM
Wire Diameter : Ø 1.6 MM
Width : 1.2 M X Length : 30 M
Tensile Strength : 415 - 427 N/mm2
Elongation : 21 - 26 %
Coating Thickness : 100 - 120 GSM Coating
Paper Backed
For Saudi Arabia Market
