Outdoor Fiber Optic Termination Box 48 Core Wall Mounted Enclosure Box For FTTB - Product

Other Specification : Outdoor Fiber Optic Termination Box 48 Core Wall Mounted Enclosure Box For FTTB 48Core Fiber Optica Splitter Distribution Box Is Widely Used In The FTTH & FTTB Application.. The Cabinet Is Made Of High Reinforced Cold-rolled Steel Material.The Cabinet Inner Is Designed In Singal Layer Rolling Panel Inside, Easy To Control, Space Saving. This Product Is Used For Fixing The Cable , Welding , Shunt And Storage .it Is An Important Part Of FTTH & FTTB. 1. Features: 1. The Box Is Made From High Reinforced Cold-rolled Steel Material With Powder Coated. 2. Water-proof Design, Sealed By Super Quality Seals, Effectively Prevent The Water Penetration. 3. It Can Be Opened For 120 Degree, Operable Sapce Is Large. 4. Can Be Used For Two 1x24 Cores Plc Splitter. 5. Support OEM Or ODM Service. 2. Application: 1. FTTH 2. FTTO 3. Fiber To The Desk 4. The New-building,extension And Rebuilding Of Optical Fiber Cable Project. 3. Product Show: 4.Technical Standard: - - - - No. | Test Item | Unit | Requirement | Test Result | Test Conclusion | 1 | Mechanical Strength Test Of Box Surface | | Put 500N Vertical Pressure On Every Surface Of The Box For 15min; After Unload, The Box Should Not Have Depredation Or Permanent Deformation | Conformance To Requirements | Pass | 2 | Mechanical Strength Test Of The Door | | Open The Door, Put 100N Vertical Pressure On The Outermost Tip Of The Door For 15min; After Unloading, The Box Should Not Have Depredation Or Permanent Deformation | Conformance To Requirements | Pass | 3 | Tightness Test | | Nozzle Diameter 6.3mm, 2.5m-3m Away From The Tested Object, Spray Water In All Directions To The Shell, Water Flow Rate: 2.5L/min5%, Duration Of At Least 3min, No Water Drop In The Box | Conformance To Requirements | Pass | 4 | Low-temperature Test

View Profile