Load - Bearing Electrical Distribution Cabinet / Cable Electrical DB Board Nine Bending - Product

Other Specification : Load-bearing Power Distribution Cabinet Nine Bending Distibution Cabinet The General Form Of The Cabinet Is Cuboid, With 12 Edges To Support The Cabinet. Bend The Steel Nine Times On The Bending Machine. Form The Profile In The Diagram. It Is Called A Nine Bending Section. The Nine Curved Sections Are Made Of 12 Prismatic Cabinets, Which Are Called Nine Bending Cabinets. Cabinet Component The General Nine Bending Cabinet Components Include Nine Bending 12 Prism Frame, Front Door, Back Plate, 2 Side Plate, Installing The Top Cover, Bottom Ring Frame And Bottom. Front Door: Cold Rolled Steel Plate 2.0mm Thickness, Door Planter Dispensing Machine Dispensing. The Door Is Opened 135 Degrees, The Door Has Stiffener Connectors Connected To The Door, And The Reinforcing Rib Is Accompanied By Modules. It Can Be Used In Line With The Line. It Can Strengthen The Strength Of The Door And Facilitate The Arrangement Of Wires. Side Plate Back Plate: 1.5mm Thickness. Mechanical Glue With MS-820 Big Lock. The Overall Cabinet Needs To Meet The Dynamic Load Bearing 1600KG Protection Level To Reach IP 54. Profile Meaning Nine Bending Is A Vivid Application Of Geometry In Industrial Manufacture, Providing A Cheap And Practical Technical Scheme For The Skeleton Of Load-bearing Cabinet. Make Great Contributions To The Development Of Industrial Automation. Process Performance And Features 1. Mounting Plate Distance Can Move From Back And Forth To Adjust Depth. 2. The Down Hole Have Cover Board ,it Is Easy To Disassemble The Front And Back Doors 3. The Three Bottom Cover Boards Can Be Exchanged Each Other,free Movement.easy To Import Cable, Open The Hole Into The Line. 4. The Base Is Easy To Assemble And Disassemble(choose By Your Self) 5.surface Preparation:degreasing,phosphating, Electrophoresis Primer, Outdoor Waterproofcover Powder. 6

View Profile