Place of Origin : China,China
Post Date : 29-10-2019
Expiry Date : 04-01-2020

Description:
By Its Very Design, The Micro-D Connector System Meets All The Requirements Of Robustness, Durability, Low Contact Resistance, High Current, Dielectric Strength, Shock, And Vibration. With 1.27 Mm (.050") Contact Spacing, Micro-D Connectors, Half The Size Of D-sub Connectors, Represent An Excellent Solution For Saving Both Space And Weight. In Addition To A Complete Range Of Micro-D Connectors To MIL-DTL-83513, Sunkye' Also Offers Micro-D PCB Connectors And Cable Assemblies In Both Metal And Plastic Bodied Versions. With Its Many Possible Configurations, Micro-D Technology Is Perfectly Suited To A Multitude Of Systems Where Weight, Miniaturization Or Signal Transmission Integrity Is Paramount: Applications Benefiting From This Technology Include Everything From Missiles And Their Guidance Systems, Through Oil Well Drilling Tools To Medical Devices, Satellites, And Scientific Research. For Very Specific Applications Such As Medical MRI Scanners Or Low Magnetic Field Detection Systems, Sunkye' Has Developed A Range Of Non-magnetic Connectors Using New Materials And Surface Treatments, Avoiding Ferromagnetic Materials. Hermetic Connectors Are Also Offered For Applications Where An Enclosure Needs To Be Fully Sealed From The Outside World.

The Twist Pin Contact By Its Design And Performance Enables The System To Meet The Most Severe Requirements €“ Often Significantly More So Than Stipulated In The MIL-DTL-83513 And MIL-DTL-32139 Standards. The Male Micro-D Contact Is Made Up Of 10 Strands Of Beryllium-copper And Copper Alloy Twisted Together, Welded Then Bumped. These Sprung Strands Are In Fact Compressed During Insertion Into The Turned Female Contact And Therefore A High Number Of Electrical Contact Points Are Permanently Assured While Retaining Flexibility And Ease Of Insertion/ Extraction. The Bulged Point Will Be Compressed Inside The Socket During Insertion. Insertion And Retention Performance Of The Twist Pin And Socket Mated Pair. Both Socket Contact Chamfer And Twist Pin Hemispherical Radius Contribute To Ensuring Adequate Insertion Even In Case Of Misalignment.

Range Of Micro-D Mil Dtl 83513 Connectors Which Is Covered By The MIL-DTL-83513* Standard Is Ideally Suited To Equipment And Applications Where Weight, Miniaturization And Long Term Performance Are Required. It Is Available:
- In 10 Contact Arrangements (9 To 100 Contacts) For Rectangular Micro-D Connectors.

MIL Dtl 83513 Specification
CHARACTERISTIC SPECIFICATION TEST METHOD
CURRENT RATING 3 A Max. EIA-364-70
CONTACT RESISTANCE 10 MO max. EIA-364-06
INSULATION RESISTANCE 5000 MO min.@ 500 Vdc EIA-364-21
DIELECTRIC WITHSTANDING VOLTAGE 600 Vac EIA-364-20
- SEA LEVEL 0 M 150 Vac
- ALTITUDE 21 Km (70,000 Ft)
CONTACT ENGAGING AND 170 G Max.(6 Oz) EIA-364-37
SEPARATION FORCE 14 G Min (0.5 Oz)
CONNECTOR MATING AND 283 G (10 Oz) X Number Of Contacts Max. EIA-364-13
DE-MATING FORCE
CONTACT RETENTION 2.26 Kg (5 Lbs) For 5 Seconds Min. EIA-364-29
DURABILITY 500 Mating Cycles Min. EIA-364-09
TEMPERATURE RANGES
- STANDARD -55°C / +125°C
- HIGH TEMP -55°C / +200°C
VIBRATION 10Hz-2000Hz,196m/s² EIA-364-28 - TEST CONDITION IV
SHOCK 735m/s² 11ms EIA-364-27 - TEST CONDITION E
SALT SPRAY 48 Hours EIA-364-26 - TEST CONDITION B
HUMIDITY Insulation Resistance > 1MO EIA-364-31 - METHOD IV