Platinum cured silicone rubber for tire mold - Product

Brand : Hongye Silicone
Model : E620
Material : Silicone
Color : White

Size or Volume : 25kg/drum And 200kg/drum
Weight : 200kg
Other Specification : Advantage Of Platinum Cure Silicone Rubber For Tire Mold 1)Non- Shrinkage 2)high Tensile And Tear Strength With High Copy Times 3) Exceptional Fluidity And Good Operability (mixing Ratio At 1:1 ) 4)high Temperature Resistant In 250 Centigrade Operation Instruction Of Platinum Cure Silicone Rubber For Tire Mold Step One: Take 100g Of Part A And 100g Of Part B And Mix In 1:1 And Mix The Two Part Evenly. Step Two: Vacuum Pumping Without Exception, This Step Takes Less Than 10 Minutes. Note: The Time For Vacuum-pumping Should Be Less Than 3—5 Minutes ,otherwise, Once The Silicone Rubber Has Cross-link Reaction During Vacuum Pumping Process, It Will Not Be Operated. Step Three: Pouring The Mixture Into The Frame With Original Mold Slowly . Shelf Life For Silicon Rubber For Mold Making 8~10months, When Stored In A Dry & Cool Place Under The Room Temperature 25. Packing For Silicon Rubber For Mold Making 20kg/drum For Part A+ 20kg/drum For Part B In One Set ,200 Kg/drum For Part A+ 200kg/drum For Part B In One Set Any More Information , Pls Feel Free To Contact Miss Abby Office No. :0086-755-89212369 Mob:86-18938867556 Skype:Abby10182679 Email :hysb(at)szrl(dot)net Welcome To Our Website Www Dot Szrl Dot Net

View Profile