RTV2 molding silicone rubber for stone columns - Product
UNIT PRICE
USD 10.98~13.28 ...
Place of Origin : Shenzhen,China
Delivery Terms : By Sea
Delivery Time : Within 3 Days After Receving Bank Receipt
Product Capacity : 8 Ton/Tons / Day
Payment Terms : L/C T/T Western Union
Product Description
E-635 RTV2 molding silicone rubber is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Basic Information
Brand : HONG YE SILICON RUBBER
Material : Silicone
Physical Specification
Other Specification : RTV2 Molding Silicone Rubber For Stone Columns
Description
E-635 RTV2 Molding Silicone Rubber Is Generally Named Two-components Silicone
Rubber, Part A And Part B. It Features An Exceptional Fluidity And Good Operability. The
Mixing Ratio Is 1:1,mainly Be Suitable For Making Molds Application.
Applications
E-635 RTV2 Molding Silicone Rubbercould Be Mainly Used For Food Mold , Such As Chocolate Mold , Cake Mold , It Is Also Used For Making Concrete Stones, Wax Molds, PU Molds, Resin Molds, Gypsum Casting, Candle Molding .
Advantage
-low Shrinkage (less Than 0.1% )
-high Tensile And Tear Strength With High Copy Times
-easy For Operation (mixing Ratio At 1:1 /10:1)
-good Fluidity Easy For Pouring Operation ( In Round 10000 Cps )
-it Is Food Grade With FDA
Operation Instruction Of RTV2 Molding Silicone Rubber:
1. Pls Clear The Model And Tool Totally Before Operation To Prevent Cure Inhibition.
2.Weigh The Two Part Correctly By Electronic Weight In Two Separate Container .
3. Mixing The Two Part In 1:1/10:1 And Stir Part A And Part B Evenly In 2-3 Minutes .
4.And Get The Mixture For Vacuum-pumping For De-air The Bubble In Around 2-3
Minutes . (If There Is No Vacuum Machine, Pls Pour The Mixture Carefully And Slowly
Down The Side Of The Mold Frame So That Less Bubbles Caused)
5. Enclose The Product (the Original Model) With Four Plastic Plates Or Wooden Plates.
6. Clean Your Products And Brush A Layer Of Release Agent(detergent Or Soap Water) On
Your Product.
7. Pour The Vacuumed Mixture Into The Model Frame From The Side Of The Mold Frame .
More Information, Pls Feel Free To Contact Ms. Bella:
Mobile: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Website: Www (dot) Szrl (dot) Net
Email:hysi(at)szrl(dot)net
Skype: Bellajiaqi