S13-M-1000kVA Oil-immersed Distribution Transformer - Product
Place of Origin : Foshan,China
Delivery Terms : FOB Guangzhou
Delivery Time : 15~20days
Product Capacity : 100 Sets/month
Payment Terms : T/T
Product Description
S13-M-1000kVA
Oil-immersed Distribution Transformer
(Two Winding Non-Exciting Regulation Fully Sealed)
Basic Information
Brand : CHAN XING TE
Model : S13-M-1000kVA
Physical Specification
Other Specification : Model No. S13-M-1000kVA
Product Name Oil-immersed Distribution Transformer
(Two Winding Non-Exciting Regulation Fully Sealed)
Rated Capacity KVA 1000
Rated High Voltage KV 6 / 6.3 / 10 / 10.5 / 11
High Volt. Tap Range ±5%, ±2x2.5%
Rated Low Voltage KV 0.4
Phase Number PH Three
Vector Group Yyn0 / Dyn11
No-load Loss W 870
Loading Loss W 10300
No-load Current % 0.14
Short-circuit Impedance % 4.5
Oil Weight Kg 700
Machine Weight Kg 1765
Weight Mm 3200
Base Gauge (Horizontal*Vertical) Mm 820*820
Overall Dimension Mm L1945 * W1260 * H1700
Oil Immersed Transformers Features:
1) The Oil-immersed Transformer Has Good Insulation Performance, Flexible And Reliable. It Can Be Made A Variety Of Special-type Transformers.
2) It Is Advanced Design And Reasonable Structure. Also, It Is Small Size, Light Weight, Easy Installation, And Good Economic Performance.
3) It Is Strong Ability Over Charging, Low Loss, Low Temperature Rise, And Low Noise,
4) There Is Reliable Shell.It Can Be Run Under Harsh Environment.
5) Using New Type Machine Structure, There Are High Mechanical Strength And Strong Sudden Short-circuit Bearing Capability.
6) Good Insulation And High Level Impacting Lightning Surge,
7) Fully Sealed Product, No Oil Conservator, Lowers Than Similar Product. It Is Used Vacuum Impregnating Oil Techniques, Fully Take Off The Humidity In Oil Box. It Is Non-contact With Oil And Air Completely. It Is No Need To Do Oil Sample Test Regularly.
Oil Immersed Transformers Applications:
1) Outside Or Inside,
2) The Altitude Of Installation Site Can Not Be Over 1000M, The Altitude Of High Pressure Model Installation Site Can Not Be Over 4000m,
3) Environment Temperature Between +40~-30 Degrees,
4) Relative Humidity 95%,
5) The Product Will Be Design According To Customer's Requirements When It Is Used In Non-normal Condition.