Automated SAW Welding Machine For Steel Box Beam Production Line - Product

Other Specification :  Automated SAW Welding Machine For Steel Box Beam Production Line Description: Cantilever Submerged Arc Welding Machine And Cantilever Back Welding Machine Have The Same Structure: Moving Cart, Stand Column, Transverse Boom, Welding Arm, Seam Tracking Device, Wire Feeding System, And Electric Control Box. Their Only Difference Is The Configuration Of Welding Power. Moving Cart Is Composed Of One Base, Four Moving Wheel, And 2pcs Of Wheel Axles, 2 Sets Of Motors. 2 Sets Of Motors Drive Four Wheel Axles Through The Gear. It Composes 4 Wheel Driving Systems, In Order To Make It Stable And Reliable Operation. On The Base Of A Double-decker Frame, You Can Put Welding Power On Bottom And Wire Plate Or Wire Tube On Top. Specifications: A. Technical Parameter Work-piece Size: 300-1200 Mm Welding Speed: 0.15-1.5 M/min Returning Speed: 4.5 M/min Cart Gauge: 1400 Mm Main Motor Power: 1.4 Kw Pneumatic Pressure: 0.5-0.7 MPa B. Range Of Supply Cart Assembly: Moving Cart, Motor Reducer, Stand Column, And Beam. Welding Arm And Tool Carriage: Welding Arm, Tool Carriage, And Motor Reducer. Weld Tracker: Arc Guiding Frame, Arc Guiding Wheel, And Air Cylinder. Electric Control System: Electric Control Box, Operating Box, And AC Frequency Converters. Pipe And Cable System: Control Cable, Air Supply Pipe, And Wire Sliding Frame. Welding System: Single Arc Single Wire: Zhouxiang ZX5-1000 Submerged Arc Welding Power, Control Box, And Control Cable. Two Sets For Each; Double Arc Double Wire: Lincoln DC-1000 And AC-12002 Submerged Arc Welding Power, Control Box, Control Cable. Two Sets For Each. C. Technical Documents Operation Manual For Whole Machine (including Electrical Diagrams, And Foundation Drawing) Certification For Whole Machine Operation Manual For Frequency C

View Profile